How To Draw Straight Lines In Paint Tool Sai

Download Article

Download Article

Getting a new art program can be daunting at start, specially if y'all oasis't used i earlier. This guide will explicate most of the features of Paint Tool SAI so you can get started creating your masterpieces.

Steps

1. ane

   Create a new epitome. Once you lot have the program open, go to the top left of the window and hover over the "File" button, then click "New".

2. 2

   Choose a name and size for your sheet. Type a proper name you desire for your image in the box labelled "Name," then pick the width and elevation y'all want in the boxes labelled "Width" and "Pinnacle".

   Advert

3. iii

   Choose from the default brushes. Play effectually with the brushes on the side to find i that fits what you need. The basic brushes are:

   • "Pen", which is solid and doesn't blend,
   • "Brush", which is similar to pen but blends with whatever color is underneath it,
   • "Eraser" removes any colour,
   • "AirBrush" is like "Brush" only has blurry edges,
   • "Water" has inappreciably whatsoever colour, but tin blend two colours together without calculation whatever.

4. 4

   Add a brush. If you scroll underneath the default brushes, you will see empty grey boxes. These are spaces to add your own custom brushes.

   • Right click on i of these boxes and choose an option to base of operations your brush off.
   • Either right click on your new brush and select "Options," or double click it. This will open the "Custom Tool" carte du jour.
   • In the menu, you can alter the name, description, stroke and pressure stabilizers, and a shortcut key which you can printing to automatically select your brush.

5. 5

   Change castor settings as needed. Sometimes default brush settings aren't what y'all need, and then you lot will somewhen need to modify them. All the settings are nether the surface area where you lot select brushes.

   • The four black icons straight below the castor option control how blurry the edges of your brushes are.
   • "Min Size" determines how small your brush tin get when pressing lightly on a pen tablet. "Density" is how opaque or transparent the brush is.
   • The "(simple circle)" drop-downwardly menu lets you choose the shape of the castor and the "(no texture)" one gives the brush an overlay, the sliders nest to the drib-downwardly menus control how strongly these settings appear.
   • Blending controls how much the brush colour blends with the colours around it.
   • Dilution is how much colour your brush concord when information technology goes over other colours.
   • Persistence determines how long the castor holds the colour over unpainted areas when information technology blends with something.

6. 6

   Change advanced brush settings if desired.

   • "Min Density" is the same equally "Min Size" mentioned in the previous step, but this affects density instead of size.
   • "Max Density Force per unit area" is how much pressure it takes to get to 100% density.
   • "Hard Soft" is for how much pressure you utilise when using the brush, hard pregnant you button down a lot and soft for more gentle people.

7. 7

   Choose a colour. Above the brushes is a rainbow-coloured circumvolve with a square inside it. Click anywhere along the circumvolve to select a hue. Click in the foursquare to change the saturation and effulgence. There are additional options above the colour wheel:

   • An "RGB Slider" that lets you select a color past mixing different amounts of red, green, and blue,
   • A "HSV Slider" is an alternative way to alter the hue, saturation, and brightness,
   • The "Colour Mixer" gives yous a slider to put 2 colours in to select and color in between them,
   • "Swatches" lets y'all save colours for later by correct-clicking and selecting "Set",
   • A "Scratchpad" allows you to test your colours and brush settings without modifying your artwork.

8. eight

   Use layers. On the side of your window, there should be a large greyness box with a small purple box inside it that says "Layer 1." Layers are like painting on sheets of glass and placing the sheets on acme of each other to make a picture. They allow you to change parts of an artwork without touching the residue and change how things overlap in your artwork.

   • On each layer in that location is an epitome of an middle, clicking the icon volition toggle the visibility of the layer.
   • Above the listing of layers there is an icon of a blank page with a folded corner, clicking that will give you a new layer.
   • Side by side to the new layer button is the "New Linework Layer" button. This gives yous a special kind of layer that has a different ready of tools.
   • Next to that is the "New Layer Set" button, pressing it gives yous folders you can put groups of layers in and control them equally if they're 1.
   • Underneath the new layers there are two ways to merge a layer into the one beneath it.
   • Under the new set button in that location's a button to clear the layer you take selected and adjacent to that you tin can printing the trash can to delete the layer entirely.
   • Double-clicking the layer will permit you lot change it's proper name.

9. 9

   Utilize layer effects. Above the layer options you will find drop-down menus chosen texture, outcome, and fashion too as a slider for opacity and some check-boxes.

   • Texture gives your layer a texture. Calibration changes how large the texture appears and the slider to the right changes how strongly the texture appears.
   • Effect is very like to texture.
   • Mode effects how the layer interacts with other layers.
   • Opacity controls the transparency
   • Preserve opacity prevents you from painting any where on the layer that isn't already painted
   • Clipping group is like to preserve opacity but it is based off hat is on the layers below it instead of itself and and everything out of the visible expanse yet exists it's merely hidden until you lot uncheck the box or add together the the layer beneath.

10. 10

    Select. At that place are two brushes chosen "Select" and "Deselect" besides as a dotted square, a dotted lasso, and a "Magic Wand", these are all used for selecting areas to motion, rotate, calibration, or pigment without going exterior the boundaries. If you click on the dotted foursquare when you accept something selected, there will exist buttons to transform, scale, deform, rotate, and flip the selected area.

    Advertising

Add New Question

• Question

  Can I draw a perfect circle with PaintTool SAI?

  

  There isn't an actual shape-cartoon tool in SAI. Still, what you can do is make a dot with a 500 signal sized brush, then erase the middle of it with a 450-point sized castor. In other words, depict with a larger brush, and so erase with a smaller brush.

• Question

  How do y'all save it in a way that you tin continue editing?

  

  Become to file, and so printing Save As, and then save information technology. You'll come across it in your pictures folder. Click on it, so it'll take you back.

• Question

  How much does information technology cost to buy the full version of PaintTool SAI?

  

  It should cost you nearly $50 USD.

• Question

  How practice I get more tools?

  

  Hold down the ALT button on your keyboard, then agree down CTRL/CMD, press T (tools) and enter at the aforementioned fourth dimension.

• Question

  How do I copy and paste using PaintTool SAI?

  

  Use the option tool and choose the area you want to copy. Then, utilise Ctrl+C to copy and Ctrl+V to paste.

• Question

  How do I put in a base to overdraw on Paint Tool SAI?

  

  Create a split up copy of the base if you oasis't already. Open information technology in PTSai and then create a new layer over the base to color.

• Question

  My SAI doesn't seem to relieve the changes I did on my tools (such equally renaming). What can I do?

  

  Are you lot using a trial version of SAI? If that's the case, it may not work. However, if information technology is a full version of SAI, attempt closing all agile programs and reopen SAI. If that doesn't work, restart your PC and reopen SAI. If all else fails, create new tools and rename them again, and delete the others. Otherwise, redownload your version of SAI or contact the developer.

• Question

  How do I paste in an paradigm using PaintTool SAI?

  

  For paste, use ALT + V And modify ALT + T. And if you desire to only to put an image from your desktop, merely grab it and drag information technology in.

• Question

  How do I add together two pictures to one canvas when using PaintTool SAI?

  

  Open up a picture, open the other picture in sai likewise, re-create the 2nd picture you desire to put on the 1st one, switch the view to the offset motion-picture show and paste it in. Y'all tin utilize Ctrl + T to transform the picture and move, scale, rotate, and/or deform it to your liking.

• Question

  How exercise I become the reference window in the free version of PaintTool SAI?

  

  Get upwardly, and then go right, and you should see three grey buttons. Press the second 1, and you will get a reference.

Ask a Question

200 characters left

Include your e-mail address to get a message when this question is answered.

Submit

Ad

• Feel costless to experiment with the program every bit yous will learn most things past doing.

• If you lot alter one of the default brushes and tin't retrieve the old settings, new brushes will have the default settings of the one with the aforementioned proper name.

Thanks for submitting a tip for review!

Advertisement

About This Article

Thanks to all authors for creating a page that has been read 36,905 times.

Is this article upwardly to date?

Source: https://www.wikihow.com/Use-PaintTool-SAI

Posted by: barberblied1966.blogspot.com

Share this post